XL6026
PROTECTIVE COATING
XL6026 Protective Coating has been specially formulated for use as an anti-rust, corrosion-resistant coating that can be applied to virtually any bare metal surface.
XL6026’s unique flexibility and conductivity properties allow the product to be used in engine compartments where it will not interfere with hoses, belts, or electrical wiring.
XL6026, when dry, leaves surfaces with a glossy transparent coating that will not shrink or crack.
APPLICATION DATA:
Surface Preparation: Clean & dry surfaces, remove oils and any other contaminants
| Environmental Conditions: | |
|---|---|
Atmosphere | Clear and dry |
Ambient Temp. | >7 ºC |
Surface Temp. | 7 – 65 ºC |
| Application Method: | |
• Brush | |
• Dipping | |
• Spray Gun (HVLP or HELP), Spray 25 – 40 cm from surface using 35 - 45 cm spray pattern |
|
| Dry Time: | |
Assisted: | 4 – 6 min |
Unassisted: | 40 – 50 min |
| Typical Coverage: | 5 – 10 m2 / litre |
| Wet Film Thickness: | 95 – 200 microns |
| Dry Film Thickness: | 25 – 50 microns |
NOTE:
Due the fact that XL6026 is a water-based coating, use only
plastic or stainless steel piping and fittings to handle this product.
Keep from freezing.
