Languages: fren






XL6025 Protective Transit Coating has been specially formulated for use as an anti-rust, corrosion-resistant coating that can be applied to virtually any bare metal surface and then easily removed with hot or high pressure water.

XL6025’s unique flexibility and conductivity properties allow the product to be used in engine compartments where it will not interfere with hoses, belts, or electrical wiring.

XL6025, when dry, leaves surfaces with a glossy transparent coating that will not shrink or crack.

Application Data:
Surface Preparation: Clean & dry surfaces, remove oils and any other contaminants

Environmental Conditions:
AtmosphereClear and dry
Ambient Temp.>7 ºC
Surface Temp.7 – 65 ºC
Application Method:
• Brush
• Dipping
• Spray Gun (HVLP or HELP), Spray 25 – 40 cm
from surface using 35 - 45 cm spray pattern
Dry Time:
Assisted: 4 – 6 min
Unassisted: 40 – 50 min
Typical Coverage:5 – 10 m2 / litre
Wet Film Thickness: 95 – 200 microns
Dry Film Thickness:25 – 50 microns

Due the fact that XL6025 is a water-based coating, use only plastic or
stainless steel piping and fittings to handle this product.

Keep from freezing.