Language/Langue: fren

XL3555

image_pdfimage_print

ThermalLube

XL3555

POLYON® FMG ANTI-FRICTION GEAR BOX ADDITIVE

XL3555 POLYON® FMG (Fluoromolygraph) Gear Box Additive is a state-of-the-art oil additive package formulated to treat gear boxes that are using mineral or synthetic gear oils.*

XL3555 has been formulated with a carefully balanced combination of the three most effective lubricating additives available on the market today, (Polytetrafluoroethylene, Molybdenum, and Graphite). Our modern high speed manufacturing process allows these three additives, coupled with special conditioners, and other high performance chemicals, to be permanently suspended in a super concentrated, highly refined synthetic base lubricant.

XL3555 forms a thin, tenacious film that bonds to metal surfaces, filling the asperities and cavities that are always present. This thin film provides a considerable reduction in wear and in heat.

PERFORMANCE:

Increased lubricity from Fluoromolygraph penetrating metallic components results in

• Wear reduction
• Friction reduction
• Affinity for metal surfaces
• Longer bearing, gear and ring life
• Much easier starting
• Decrease in oil consumption
• Greater energy economy
• Quieter overall operation

TYPICAL SPECIFICATIONS
Product Code: XL3550
Viscosity (cSt @ 40°C) (ASTM D-445)25 – 40
Flash Point (°C)235
Specific Gravity (g/ml)0.87
ColourBlack

High performance friction-reducing additives will ensure less wear and optimize gear box efficiency. Special rust inhibitors retard the attack of gear box contaminants that will result in increased equipment life. Performance conditioners will wet-out dried up seals and gaskets which will aid in reducing gear box leakage.

*XL3555 uses a synthetic hydrocarbon base oil and is fully compatible with all mineral oils and SHC gear oils. However it is not compatible with water- or glycol-based fluids.

APPLICATION:

A one-litre bottle of XL3555 will adequately treat any gear box up to a 100-litre capacity. Larger gear boxes should use a treat level equal to 1-3% maximum of XL3555 to the entire gear oil capacity of the system.

Under “severe service” or high temperature conditions, gear boxes should be re-treated with XL3555 on an annual basis.

MIX WELL BEFORE USING
KEEP OUT OF REACH OF CHILDREN