WATER-BASED PAG DRY FILM CHAIN LUBRICANT WITH GRAPHITE FOR HIGH TEMPERATURES
XL2361 is a high temperature chain lubricant formulated from a pure graphite base suspended in a synthetic lubricant and water carrier that dries quickly to form an adherent film on virtually all surfaces, including glass and flexible materials.
XL2361 remains stable at service temperatures of 316°C (600°F) and at intermittent temperatures of 1200°C (2200°F).
XL2361 is approved by the Canadian Food inspection Agency (CFIA) for use in food processing plants.
• Environmentally safe
SURFACE PREPARATION: Substrate must be clean and dry. Etching or sandblasting will improve adhesion and wear properties.
DILUTION: XL2361 must be diluted with soft, distilled, or demineralized water to bring the product to the desired consistency prior to use, if necessary. This is achieved by adding water to XL2361, and NOT vice-versa. Addition of water must be done while solution is being thoroughly agitated.
APPLICATION: May be applied by using spray, brush, or dip methods. For oven chains and rollers, XL2361 should be sprayed onto warm surfaces at temperatures greater than 100°C/212°F and spray pressures between 80-100 PSI so that the water component will evaporate on contact, and provide optimum film formation.
|XL2361 (as supplied)|
|Fluid Component:||Water, Synthetic Lubricant|
|XL-2361 (when cured)|
|Coefficient of Friction:||0.22 static|
|Recommended thickness (mm)||0.003 – 0.008|
MIX WELL BEFORE USING
STORE AT ROOM TEMPERATURE
KEEP CONTAINER WELL-SEALED
KEEP FROM FREEZING