XL2360
WATER-BASED GRAPHITE COATING
XL2360 is a colloidal dispersion of extremely fine pure graphite in a water-based carrier that dries to form an electrically conductive adherent film on virtually all surfaces, including glass and flexible materials.
XL2360 remains stable at service temperatures of 316°C/600°F and at intermittent temperatures of 1200°C/2200°F.
[ezcol_1half]
Advantages:
• Environmentally safe
• Non-flammable
• Non-corrosive
• Non-toxic
SURFACE PREPARATION: Substrate must be clean and dry. Etching or sandblasting will improve adhesion and wear properties.
DILUTION: XL2360 must be diluted with soft, distilled, or demineralized water to bring the product to the desired consistency prior to use. This is achieved by adding water to XL2360, and NOT vice-versa. Addition of water must be done while solution is being thoroughly agitated.
APPLICATION: May be applied by using spray, brush, or dip methods. Dries in 20 minutes. If surface temperatures are over 100 °C the water portion of XL2360 will evaporate quickly leaving a fine film of graphite.
[/ezcol_1half] [ezcol_1half_end]
| PHYSICAL PROPERTIES | |
|---|---|
| XL2360 (as supplied) | |
| Lubricant: | Micro-graphite |
| Fluid Component: | Water |
| Diluents: | Water |
| Colour: | Dark Grey |
| XL-2360 (when cured) | |
| Coefficient of Friction: | 0.22 static |
| Film thickness (mm): | 0.003 – 0.008 |
MIX WELL BEFORE USING
STORE AT ROOM TEMPERATURE
KEEP FROM FREEZING
