Language/Langue: fren

XL2359

image_pdfimage_print

ThermalLube

XL2359

WATER-BASED DRY FILM WITH MOLYBDENUM FOR HIGH TEMPERATURES

XL2359 has been carefully formulated to function as a high-temperature lubricant suitable for use on metal forging and mold release applications where a tenacious lubricant film is needed.

XL2359 is a colloidal dispersion of extremely fine sub-micron molybdenum in a water-based carrier that dries to form an electrically conductive adherent film on virtually all surfaces, including glass and flexible materials.

XL2359 remains stable at service temperatures of 316°C/600°F and at intermittent temperatures of 1200°C/2200°F°

Advantages:
• Environmentally friendly
• Non-flammable
• Non-oxidizing
• Non-toxic (when dry)

Dilution:
XL2359
must be diluted with soft, distilled, or demineralized water to bring the product to the desired consistency. The water must be added to the XL2359, and NOT THE REVERSE.  Add water to solution while mixing.

Method of application:
XL2359
should be applied by brush or sprayer directly on to the metal surface.  XL2359 dries in approximately 20 minutes. If surface temperatures are over 100°C the water portion of XL2359 will evaporate quickly leaving a fine film of molybdenum.

PHYSICAL PROPERTIES
XL2359 (as supplied)
Lubricant:Sub-micron molybdenum
Fluid Component:Water
Diluents:Water
Colour:Dark Grey
XL-2359 (when cured)
Coefficient of Friction: 0.23 static
Film thickness (mm): 0.008 – 0.013

MIX WELL BEFORE USING
STORE AT ROOM TEMPERATURE
KEEP FROM FREEZING