MEDIUM DRYING FILM LUBRICANT WITH GRAPHITE
XL2352 is a solvent-dispersed colloidal graphite that air dries to the touch in 10 minutes, and completely cures in 30 minutes.
XL2352 penetrates, and adheres tenaciously to most metallic substrates with minimal surface pretreatment and preparation. Although this procedure is adequate with most applications, to achieve maximum corrosion and rust resistance, surfaces should be thoroughly cleaned and sandblasted prior to application.
Once dry, XL2352 forms an exceptionally stable, rust/corrosion resistant, and tough micro-graphite coating highly resistive to temperature fluctuations from –60°C to 400°C.
XL2352 offers: DILUTION: APPLICATION: CURING:
• Thin opaque film
• High lubricity
• Lubricates at temperature extremes
• Excellent adhesion
• Good electrical conductivity
• Excellent rust and corrosion resistance
• Room temperature curing
• Prevents galling, fretting & seizing
• Long lasting
• Will not plug application equipment
XL2352 is thixotropic in nature and will gel during storage. Preparation involves mild agitation and dilution (if required) to the consistency required for the application method chosen.
Can be applied by spray, brush, dip, or roller methods. Always agitate thoroughly prior to use.
Coating air dries to touch in ten minutes under normal ambient conditions. Full cure properties develop in approximately thirty minutes depending on the film thickness.
XL2352 (as supplied) Lubricant: Colloidal graphite
Binder: Thermoplastic resin
Fluid Component: Petroleum naphtha
Diluents: Petroleum naphtha
Flash Point: 40.5°C
XL-2352 (when cured) Coefficient of Friction: 0.167 static
Service Temperature (°C): -60 to 400
Intermittent Temperature (°C): -80 to 550