FAST DRYING FILM LUBRICANT WITH GRAPHITE
XL2351 is a solvent-dispersed colloidal graphite that air dries at room temperature and adheres tenaciously to most substrates with minimum surface preparation.
XL2351 is an exceptionally stable compound of micro-graphite and a thermoplastic resin diluted with isopropyl alcohol offering superior performance at high temperatures and with heavy loads.
• Ultra thin opaque film
• Excellent adhesion
• Good electrical conductivity
• Room temperature curing
• Very low coefficient of friction
Substrate must be clean and dry. A
solvent wipe and air dry is sufficient for
XL2351 is thixotropic in nature and will gel during storage. Preparation involves thorough agitation and dilution with isopropanol (or alcohol, ester, or ketone) to the consistency required for the application method chosen.
Can be applied by spray, brush, dip, or roller methods. Always agitate thoroughly just before using.
Coating air-dries to touch in five minutes under normal ambient conditions. Full cure properties develop in approximately two hours, depending on the film thickness.
|XL2351 (as supplied)|
|Fluid Component:||Isopropyl alcohol|
|Flash Point (°C / °F):||10 / 50|
|XL-2351 (when cured)|
|Coefficient of Friction:||0.19|
|Service Temperature:||454°C / 850°F|
|Intermittent Temperature:||550°C / 1025°F|
MIX THOROUGHLY BEFORE USING