Language/Langue: fren
image_pdfimage_print

ThermalLube

XL1845 

POLYON® SYNTHETIC XEP HEAVY DUTY
WATERPROOF GREASE WITH PTFE & MOLY

XL1845 is a carefully homogenized blend of synthetic bases combined with P.T.F.E. and molybdenum, as well as E.P. (extreme pressure) additives.

XL1845 is a superior waterproof non-melting grease, which measures 90lbs plus on the Timken Load test.

The additives used in the blending of XL1845 have been designed to give the greatest adherence to metallic surfaces. XL1845 virtually eliminates direct surface-to-surface contact of metal parts when machines are idle, during initial start-up, and during intermittent use. XL1845 is resistant to acids, alkali and salt water. This grease is recommended for severe environmental conditions as well as heavy loads.

XL1845 is available in several NLGI Grades, and can be formulated with a range of base oil viscosities.

XL1845 is recommended for the following:

• Bearings• High and low speed motors
• Conveyers• Pulp & Paper industry
• 5th wheel• Textile finishing
• Chassis• Steel mills
• Heavy equipment• Marine equipment
• All season lubrication

TYPICAL SPECIFICATIONS
Product Code: XL1845(General Specifications)
Dropping Point (°C) (ASTM D-2265)None
Melting Point (°C)None
Copper Strip Test (163°C for 3 hours)Negative*
TextureAdhesive / Tacky
Type of thickenerClay / Silica*
Oil Separation (24hrs @ 25°C) (ASTM D-1742)< 1%**
AdditivesPTFE, Molybdenum
Temperature Range (°C)-40 to 200
ToxicityNot controlled
* Except 400 Series
** Except 600 Series
TYPICAL SPECIFICATIONS
Product Code: XL1845/000/001/002/003
N.L.G.I. Grade: 0123
Base Oil Viscosity (cSt @ 40°C) (ASTM D-445)160
Base Oil Viscosity (cSt @ 100°C) (ASTM D-445) 21.7
Penetration @ 25°C (ASTM D-217)355325265240
After 60 strokes370331268240
After 10,000 strokes375335273247
After 60,000 strokes377343275255
Minimum Temperature (°C) -40-40-30-15
Maximum Temperature (°C)270270270270
Timken OK Load (kg (lbs)) (ASTM D-2509)35 (75)45 (99)45 (99)45 (99)
ColourWhite-yellow
Product Code: XL1845 (200 Series) /201/202/203
N.L.G.I. Grade: 123
Base Oil Viscosity (cSt @ 40°C) (ASTM D-445)220220220
Penetration @ 25°C (ASTM D-217)330270242
After 60 strokes333272241
After 10,000 strokes335273247
After 60,000 strokes 343275255
Minimum Temperature (°C)-16-18-15
Maximum Temperature (°C) 270270270
Timken OK Load (ASTM D-2509) 40kg (90lbs)
ColourWhite-yellow
Product Code: XL1845 (300 Series)/321/322/323
N.L.G.I. Grade: 11.52
Base Oil Viscosity (cSt @ 40°C) (ASTM D-445)335335335
Base Oil Viscosity (cSt @ 100°C) (ASTM D-445)292929
Penetration @ 25°C (ASTM D-217)355290265
After 60 strokes370297270
After 10,000 strokes375300270
After 60,000 strokes375305274
Minimum Temperature (°C) -18-18-15
Maximum Temperature (°C) 260260260
Timken OK Load (ASTM D-2509) 40kg (90lbs)
ColourWhite-yellow
Product Code: XL1845 (400 Series)/402/440/441/442/443/462
N.L.G.I. Grade: 201231.5
Base Oil Viscosity (cSt @ 40°C) (ASTM D-445) 40046046046046046
Base Oil Viscosity (cSt @ 100°C) (ASTM D-445)24323232328
Penetration @ 25°C (ASTM D-217)2703555325265240285
After 60 strokes285370331268240291
After 10,000 strokes290375335273247310
After 60,000 strokes 295377343275255320
Minimum Temperature (°C) -40-10-10012-54
Maximum Temperature (°C)215270270270270215
Timken OK Load (kg) (ASTM D-2509)45 +
Type of thickenerClay / Calcium Sulfonate
ColourWhite-yellow
Product Code: XL1845 (600 Series)/602/680/681/682
N.L.G.I. Grade:1.5011.5
Base Oil Viscosity (cSt @ 40°C) (ASTM D-445)60686868
Penetration @ 25°C (ASTM D-217) 285361325285
After 60 strokes291365331291
After 10,000 strokes310370334310
After 60,000 strokes 320375340320
Minimum Temperature (°C) -54-58-55-50
Maximum Temperature (°C) 215215215215
Timken OK Load (kg) (ASTM D-2509)45 +
Type of thickenerClay
ColorYellow or Purple