Language/Langue: fren






XL0895 series of synthetic lubricants are designed for the lubrication of bearings, chains, slide-ways and gears where temperatures may exceed 150°C. These fluids are anti-static, and will not leave any residue after the carrier evaporates. (Use XL0895/900 series for molybdenum residue)

XL0895 is a polyolester-based lubricant formulated without any unstable polymers to increase its viscosity index. This helps eliminate the formation of varnish and carbon deposits at high temperatures. The inherent high viscosity index of XL0895 permits optimal lubrication across a wide range of temperatures.

XL0895 does not leave any carrier residue, thereby eliminating the accumulation of solid matter which may cause mechanical breakdowns and increase overall maintenance costs. This fluid will, in most applications, dislodge existing sludge and varnish formed from previous lubricant applications.

XL0895 reduces energy consumption by maintaining a clean lubricating film, even at high temperatures, which extends the interval between re-lubrication and reduces the amount of oil consumed. This also reduces the smoke and odours inherent to hot oil.

XL0895 was formulated specifically to give maximum protection against wear, rust, oxidation and corrosion, thereby prolonging equipment life, while reducing overall maintenance costs.

• Exceptional stability at high temperatures
• Cleanliness
• Low Volatility
• Energy Efficiency
• Improved Protection
• High Viscosity Index

XL0895 is recommended for:
• High temperature conveyor chains.
• Chains for bottling plants.
• Chains in ceramic plants
• Bearings for drying ovens.
• Bearings, seals etc.
• Textile industry

Product Code: XL0895 /046/068/100/220/225/229/320/460
ISO Grade046068100220220220320460
SAE Grade102030505050--
Viscosity (cst @ 40°C) (ASTM D-445) 46.371.6101235237220318470
Viscosity (cst @ 100°C) (ASTM D-445) 7.510.812.924.025.418.829.140
Viscosity Index12714012412813095125125
Rust Test (Distilled Water, 48 hrs) (ASTM D-6557)PassPassPassPassPassPassPassPass
Rust Test (Sea Water, 48 hrs) (ASTM D-6557)PassPassPassPassPassPassPassPass
Flash Point (°C) 240243245248266300260248
Fire Point (°C) 265277278279316-280280
Autoignition Point (°C) 400410410410--410410
Pour Point (°C)<-40-40-38-37-18-36-32-22
Residue (%weight)<0.01<0.01<0.01<0.01<0.01<0.01<0.01<0.01
Evaporation Loss 4hrs @ 204°C (% weight) <2<2<2<2<2<0<1<1
Shell 4 Ball Wear Test 40kg0.370.380.380.380.350.350.370.36
Specific Gravity (g/ml @ 15°C) 0.880.880.900.910.940.970.930.93

Before using one of the XL0895 series of fluids:

A special formulation containing a solvent (XL0895/469) should be used to clean the sludge left in equipment by previous oils.

Add XL0895/469 at between 5 and 10% of the oil capacity and let the equipment run un-pressurized, at a maximum temperature of 50°C for 24 to 48 hours.

Once completed, change the filter, drain the oil and replace it with new XL0895 fluid.