Language/Langue: fren

XL0715

image_pdfimage_print

ThermalLube

XL0715

100% SYNTHETIC NON-MELTING PAO GREASE FOR HIGH TEMPERATURES

XL0715 is an olefin-based grease designed for critical high temperature performance. XL0715 is formulated with high polymer base stocks, which result in exceptionally low volatility at higher temperatures, as depicted in the table below.

FEATURES:
• Exceptional Thermal Stability• Non Carbonizing
• High Performance EP Additives• Waterproof
• Superior Rust Protection• Performs from idle to high R.P.M.
• Non Melting, Non Dripping
APPLICATIONS:
• Foundries
• Skate Bearings
• Ovens
• Dryers, etc
VOLATIZATION OVER 72 HOURS
72 hours @ 200°C............................... 1%
72 hours @ 250°C............................... 4%
72 hours @ 300°C............................. 12%
72 hours @ 350°C ............................. 28%
72 hours @ 400°C ............................. 70%

XL0715/252 is a special grade formulated with a calcium sulphonate base to provide the same protection at lower temperatures.

TYPICAL SPECIFICATIONS
Product Code: XL0715/001 /002 /252
N.L.G.I. Grade:122
Penetration @ 25°C (ASTM D-217) 320279265
After 60 strokes325280275
After 10,000 strokes336302280
After 100,000 strokes (with 10% water) 340 306306
Dropping Point (°C) (ASTM D-2265)None >250
Melting Point (°C)None
Copper Strip Test (163°C for 3 hours)Negative
TextureSmooth / Tacky
ColourYellow or BlueBrown/yellow
Timken OK Load (kg) (ASTM D-2509)222222
Type of thickenerSynthetic Silica
Oil Separation (24hrs @ 25°C) (ASTM D-1742)2.5% max1% max1% max
Temperature Range (°C) -19 to 400-19 to 400-40 to 325
Minimum Dispensing Temperature (°C)-18 -10-35
Base Oil Viscosity (cSt @ 40°C) (ASTM D-445)1250 1250 350
Base Oil Viscosity (cSt @ 100°C) (ASTM D-445) 100 100 n/a
ToxicityNot controlled

N.B. Because of the highly adhesive and thixotropic nature of XL0715 precautions must be taken NOT to “over-lubricate” bearings. Apply XL0715 SPARINGLY to a clean, dry bearing. Inspect during use to determine re-lubrication cycle.